AMS標準被譽為航空航天材料領域的“全球性標準”，適用于全球范圍內航空飛行器零件、系統的設計和生產以及采購，也是可供我國航空材料研制、生產和使用參照的重要材料標準。
1.AMS7014-2019 Titanium Alloy. High Temperature Applications, Powder for Additive Manufacturing.Ti-6.0Al-2.0Sn-4.0Zr-2.0Mo增材制造用Ti-6.0Al-2.0Sn-4.0Zr-2.0Mo高溫鈦合金粉末
This specification covers a heat-resistant titanium alloy in the form of pre alloved powder.
2.AMS7004-2019 Titanium Alloy Preforms from Plasma Arc Directed Energy Deposition Additive Manufacturing on Substrate Ti-6Al-4V Stress Relieved等離子強定向能量沉積增材制造成形TI-6A1-4V合金預成形體(去應力態)
This specification covers preforms fabricated up through 5.5 inches(140 mm) inclusive in deposition width thickness(see 82.5)using a Plasma Arc Directed Energy Deposition(PA-DED) additive manufacturing process on a Ti-6Al-4V substrate that are subjected to post-deposition stress relief heat treatment.This is a wire fed additive manufacturing process.If required by the CEOpreforms may require subsequent machining to meet requirements for their intended final part application.
3.AM54919J-2019 Titanium Alloy Sheet, Strip, and Plate 6Al-25n-4Zr-2Mo
0.08Si Duplex Annealed
雙重退火Ti-6Al-25n-4Zr-2Mo-0.085i合金薄板、帶材及板材
This specification covers a titanium alloy in the form of sheet, strip, and plate 0.025 to 3.000 inches(0.64 to 76.20mm),inclusive,in nominal thickness.
4.AMS6947B-2019 Titanium Alloy, Bars, Wire, Forgings, Rings,and Drawn Shapes 4AI-2.5V-1.5Fe Annealed, Heat Treatable
可熱處理的退火態Ti-4AI-2.5V-1.5Fe合金棒材、絲材、鍛件、環件及拉拔型材
This specification covers a titanium alloy in the form of bars, wire forgings,flash welded rings,drawn shapes 4.000 inches(101.60 mm) and under and stock for forging headingor flash welded rings of any size.
5.AMS6907C-2020 Titanium Alloy Bars, Forgings, and Forging Stock 6.0AI-
2.05n-4.0Zr-6.0Mo Duplex Annealed
雙重退火Ti-6.0A1-2.05n-4.0Zr-6.0Mo含金棒材，鍛件及搬坯
This specification covers a titanium alloy in the form of bars, forgings up through 4.000 inches(101.60 mm),inclusive in nominal diameter or least distance between parallel sides and 32 square inches (206.46 cm2)maximum cross sectional area, and stock for forging of any size
6.AMS6907C-2020 Titanium Alloy Bars, Forgings and Forging Stock 6.0Al
2.0Sn-4.0Zr-6.0Mo Duplex Annealed
雙重退火Ti-6.0Al-2.0Sn-4.0Zr-6.0Mo合金樓材、銀件及鍛還
This specification covers a titanium alloy in the form of barsforgings up throuah 4000 inches101.60 mm), inclusive in nominal diameter or leas distance between parallel sides and 32 square inches (206.46 cm2)maximu cross sectional area,and stock for forging of any size
7.AMS6906C·2019 Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al
2.0Sn-4.0Zr-6.0Mo Solution Heat Treated and Aged
固溶時效態Ti-6.0Al-2.05n-4.0Zr-6.0Mo合金棒材，假件及假還
This specification covers a titanium alloy in the form of bars up through
4.000 inches(101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches(101.60 mm) inclusive, and stock for forging of any size(see 8.7)
8.AMS6920D-2019 Titanium Alloy Bars, Forgings and Forging Stock 3AI-8V.6Cr-4Mo-4Zr Solution Heat Treated
固溶熱處理態Ti-3A1-8V-6Cr-4Mo-4Zr臺金棒材，鍛件及鍛還
This specification covers a titanium alloy in the form of bars up through
4.000 inches(101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches(101.60 mm).
inclusive and stack for foraian ofanw sizefsee 863 for toraina otanyszesee 8.b)
9.AMS6926C-2019 Titanium Alloy Bars, Forgings and Forging Stock 13V-11Cr-3AI Solution Heat Treated and Aged固溶時效態Ti-13V-11Cr-3AI合金棒材、鍛件及鍛坯
This specification covers a titanium alloy in the form of bars up through
4.000 inches(101.60 mm) inclusive, in nominal diameter or least distance between parallel sides, forgings of thickness up through 4.000 inches(101.60 mm), inclusive, and stock for forging of any size (see 8.6).
10.AMS4926P-2019 Titanium Alloy. Bars Wire and Rings 5AI-2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
退火態、忌暖強度110 ksi(758 MPa)Ti-5AI-2.5Sn合金棒材、絲材及環件
This specification covers a titanium alloy in the form of bars, wire,flash welded rings 4.000 inches(101.60 mm) and under in nominal diameter or least distance between parallel sides and 16 in2(103 cm2) and under in cross- sectional area, and stock of any size for flash welded rings.
11.AMS4931G-2019 Titanium Alloy Bars, Forgings, and Rings 6Al-4V Extra
Low Interstitial(ELl) Duplex Annealed Fracture Touqhness間隙雙退火態Ti-6AI-4V合金棒材、鍛件和環件
This specification covers a titanium alloy in the form of bars 6.000 inches(152.40 mm) and und
